Jupiter Card

Jupiter Card

Jupiter Card uses processor ATMEL AT90S2323 or AT90S2343 and memory EEPROM 24LC16. This card is also named Jupiter Card 1.

Jupiter Card - SMD, Jupiter Card - SMD - 2, Jupiter Card - SMD - 3

jupiter_smd.bmp - PCB of Jupiter Card with SMD processor and EEPROM.- one wire connection.
jupiter_smd2.bmp - PCB of Jupiter Card with SMD processor and EEPROM. The pin 3 of processor is not connected, so a programmer with a separate oscillator must be used to program this card - suitable programmers are in Programmer for Jupiter Card.
jupiter_smd3.bmp - PCB of Jupiter Card with SMD processor and EEPROM. This PCB is the same as version 2, but when the programming of the processor is finished, the pads C4 and C8 could be easy disconnected.Use a bit of tin to connect them again. This card was specially designed for Seca, but it can be used for Irdeto, too.

The PCB's are about 0.8 mm thick.

Jupiter Card SMD

Jupiter Card SMD2

Jupiter Card SMD3

Jupiter_SMD_card_in_CAM

Jupiter Card - DIL, Jupiter Card - DIL - 2

jupiter_dil.bmp - PCB of Jupiter Card with DIL processor and EEPROM.- one wire connection.
jupiter_dil2.bmp - PCB of Jupiter Card with DIL processor and EEPROM. Connections of C4 and C8 pads are made by jumpers. The pin 3 of processor is not connected, so a programmer with a separate oscillator must be used to program this card - suitable programmers are in Programmer for Jupiter Card. This card was specially designed for Seca, but it can be used for Irdeto, too.

The PCB is about 0.8 mm thick.

Jupiter Card DIL

Jupiter Card DIL2

Download PACKET_Q (84k)

Content of Packet_q:

info_q.htm - this page,

jupiter_smd.bmp - PCB of Jupiter Card SMD,

jupiter_smd2.bmp - PCB of Jupiter Card SMD - 2,

jupiter_smd3.bmp - PCB of Jupiter Card SMD - 3,

jupiter_dil.bmp - PCB of Jupiter Card DIL,

jupiter_dil2.bmp - PCB of Jupiter Card DIL - 2.

HOME E-MAIL